AXLE3416CASTLENUTS800743BK.jpg
AXLE3416CASTLENUTS800743BK.jpg

800743 CUSHMAN HAULSTER TRUCKSTER-TWO (2)-AXLE SLOTTED NUTS 3/4"-16 PART REAR/FRONT

$8.99
Only 6 left in stock

CONTINUE SHOPPING

  • For the three or four wheeled cushman truckster haulster or other cushman applications.

  • SO THESE ARE 3/4" I.D. AND 16 THREADS PER INCH. YOU WOULD USE A 1-1/8" WRENCH TO TIGHTEN.

  • HERE ARE THE SPECS: THE SLOTTED/CASTLE NUT IS APPROX. 1-1/8" O.D. AND 3/4" I.D. THE HEIGHT OF THE WHOLE CASTLE NUT FROM TOP TO BOTTOM IS APPROX. 5/8". 

  • THESE ARE FOR NEWER MODELS IN THE 1990'S WITH LARGER AXLES.

  • MAY BE USED FOR OTHER APPLICATIONS.

  • If you are unsure this fits your cushman model, please ask us a question to verify this fits before you buy.

Quantity:
Add To Cart

CONTINUE SHOPPING

  • For the three or four wheeled cushman truckster haulster or other cushman applications.

  • SO THESE ARE 3/4" I.D. AND 16 THREADS PER INCH. YOU WOULD USE A 1-1/8" WRENCH TO TIGHTEN.

  • HERE ARE THE SPECS: THE SLOTTED/CASTLE NUT IS APPROX. 1-1/8" O.D. AND 3/4" I.D. THE HEIGHT OF THE WHOLE CASTLE NUT FROM TOP TO BOTTOM IS APPROX. 5/8". 

  • THESE ARE FOR NEWER MODELS IN THE 1990'S WITH LARGER AXLES.

  • MAY BE USED FOR OTHER APPLICATIONS.

  • If you are unsure this fits your cushman model, please ask us a question to verify this fits before you buy.

CONTINUE SHOPPING

  • For the three or four wheeled cushman truckster haulster or other cushman applications.

  • SO THESE ARE 3/4" I.D. AND 16 THREADS PER INCH. YOU WOULD USE A 1-1/8" WRENCH TO TIGHTEN.

  • HERE ARE THE SPECS: THE SLOTTED/CASTLE NUT IS APPROX. 1-1/8" O.D. AND 3/4" I.D. THE HEIGHT OF THE WHOLE CASTLE NUT FROM TOP TO BOTTOM IS APPROX. 5/8". 

  • THESE ARE FOR NEWER MODELS IN THE 1990'S WITH LARGER AXLES.

  • MAY BE USED FOR OTHER APPLICATIONS.

  • If you are unsure this fits your cushman model, please ask us a question to verify this fits before you buy.

You Might Also Like

814475 ONE (1) NEW OEM REAR END DIFFERENTIAL ROLLER BEARING CONE FOR WORM GEAR CUSHMAN PART TRUCKSTER HAULSTER.
$27.99
805860 FOUR (4) NEW OPEN END LUG NUTS SIZE 7/16"-20 X 3/4" TO REPLACE CUSHMAN PART TRUCKSTER HAULSTER.
$7.99
814465 ONE (1) NEW OEM CARRIER HOUSING/WORM RETAINER GASKET PART FOR ONE SPEED DIFFERENTIAL.
$4.99
Sold Out
805860 TWO (2) NEW OPEN END LUG NUTS SIZE 7/16"-20 X 3/4" TO REPLACE CUSHMAN PART TRUCKSTER HAULSTER.
$3.99
879476 ONE (1) NEW REAR AXLE FLANGE HUB OUTER RETAINER WITH GREASE/OIL SEAL AND GASKET TO REPLACE CUSHMAN PART. FOR THREE OR FOUR WHEELED TRUCKSTER HAULSTER. INCLUDES 814489, 814488, 808303.
$28.50
Sold Out